What we do

The ladle shroud nozzle for continuous casting is alsocalled the protective sleeve. It is an important component connecting the ladleand the tundish. It is connected to the lowershroud of the sliding shroud device at the bottom of the ladle, and the lowerend extends into the tundish.The shroud is an important functional refractorymaterial for maintaining casting and improving steel quality. The length ofthe shroud is generally 600-1800mm, the pipe diameter is 90-150 mm, and thestructure of the ladle shroud nozzle is shown in Figure 2. Its use conditionsare harsh and must have the following functions: excellent thermal shockresistance; good mechanical strength; excellent resistance to alternatingcorrosion of molten steel and slag, high oxidation resistance, and in addition,other suitable properties are required for some special steel grades.moreinformation,please check here Tundish nozzleSlide Gate Plate is a criticalcomponent in the continuous casting process, used to controlthe flow of molten steel from theladle or tundish to the crystallizer. The following is a detailed description:Roleand Function·       Flow Control: The slidinggate plate adjusts the opening size of the nozzle through the slidingmechanism, thereby controlling the flow of molten steel. This is very importantfor maintaining a constant and controllable casting process.·       Operational Flexibility: The sliding gate plate allows operators to adjust themolten steel flow rate as needed during the casting process to adapt todifferent production requirements and conditions.·       Emergency Stop: In an emergency, the slidinggate plate can completely close the flow channel and stop the flow ofmolten steel, thereby preventing accidents and losses. Slide gate plate for Converter
The slide gate plate is madeof sintered corundum, fused corundum, fused zirconium corundum, zirconiummullite and other main raw materials. It is combined with new resin, formed byhigh pressure and fired at high temperature. It has the advantages of highstrength, super hard, high temperature resistance and corrosion resistance, andstrong thermal stability.Stopper MonoblockStopper is used mainly for flow control on Molten Steel poured fromtundish to mould. Monolithic Stopper is installed in the Tundish above the Sub Entry Nozzle and the gap between stopper head and Nozzle decide thethroughput requirement of Molten Steel inside the Mould.Argon can be blown into the tundishthrough argon inlet to prevent nozzle from Clogging ( specially designedfeature wherever it is required we design and customise accordingly)SPECIAL FEATURES:
o Facility for gas purging
o Anti oxidant properties
o Design and size as per customer’s requirement
o Clogging free casting for long sequence of casting
o Gas purging facilities to prevent alumina clogging (optional)
o Slag zone immersed part re-inforcement with special material for long life
o Argon sealing purging arrangement can be provided on customer’s request
o Wide range of formulation for withstanding oxidation and long sequencecasting
o Different assembly methods for assured security even in long sequence casting
o We manufacture Silica free Oxy-bore ladle shroud for less corrosion and longsequence castingRecycling slide gate plates to savecosts and reduce waste The top 5 ladle shroudmanufacturers in ChinaProduction and applicationof isostatically pressed refractory materials SEN首页重定向声明adam wang |ArchinectMonoblockStopper is used mainly for flowcontrol on Molten Steel poured from tundish to mould. Monolithic Stopper isinstalled in the Tundish above the Sub Entry Nozzle andthe gap between stopperhead and Nozzle decide the throughput requirement of Molten Steel inside theMould.Argon can be blown into the tundish through argon inlet toprevent nozzle from Clogging ( specially designed feature wherever it isrequired we design and customise accordingly)